GETA 1000 ALARM MONITORING CENTER
TECHNICAL SPECIFICATIONS
- It has 80C51 microprocessor.GETA 1000, is designed and produced by microprocessor control technology.
- This program is saved in EPROM.It is not effected by the no power.
- The events that happen while it is working , can be seen on the LCD display.The events can be seen on the LCD display as 4/2 forming and can be seen 4/11 forming in Contact ID format.There; the first 4 digit are account code and the second two digit are the events codes.On this display , the date and the time can be seen at the same time.The time and the date can be changed by two buttons and supervised by the key.
- All the events including the coming signals and the troubles that occur can be seen on the LCD display and can be printed by the printer .All the alarm signals can be resetted by acknowledge button.
- All the events can be sent to the computer by RS-232 port.GETA1000 sends the Radionics 6500 format as serial ASCII data at 1200 baud: 8 data bits, 1 Stop bit and Even parity.
- 9999 x 99 different alarm codes can be received from one telephone line.
- There is an automatic " watchdog" system .If the program stops running , The "watchdog" system resets the microcontroller and then program begins running again.Despite this , if the program doesn't start running , trouble led begins flashing.
- The telephone line can be controlled by the 3 minutes intervals.If a problem is recognized , the " line fault " led begins to light.
- The device controls the printer line and the printer working .If a problem is recognized , the message " PRINTER ERROR " is written on the LCD display and also gives an buzzer sound .
- There is automatic battery charge and decharge control.
- The device controls its battery voltage and if recognises a reduce in the voltage (under 11 volts), the message "LOW BATTERY " is written on the LCD display and also gives a buzzer sound.
TELECOMMUNICATION
SPECIFICATIONS
GETA 1000 Supports the international communication formats at the same time which are shown below.
| NAME | HANDSHAKE | DATA | BOUD | FORMAT | EXTENDED | KISS OFF |
| Geta | 2300Hz | DTMF | DTMF | 4/2 | NO | 2300Hz |
| Contact ID 1400Hz | Dual Tone | DTMF | DTMF | 4/2/1/3/2/3 | NO | 1400Hz |
| Sur-Gard | 2300Hz | DTMF | DTMF | 4/2,4/3 | NO | 2300Hz |
| Franklin | 2300Hz | 1800Hz | 20bps | 4/2 | NO | 2300Hz |
| Radionics | 2300Hz | 1800Hz | 40bps | 4/2 | NO | 2300Hz |
| Other Pulse | 2300Hz | 1800Hz | 20-40bps | 4/2 | NO | 2300Hz |
| Other Pulse | 1400Hz | 1800Hz | 20-40bps | 4/2 | NO | 1400Hz |
If wanted , new communication format can be added to the software.
Dielectric Isolation Voltage : 2500 Volts.
Signal output level : 0 dBm.
Input and output empedance: 600 Ohms.
Signal output DC level: 0 Volt.
Receiving sensitive: - 40 dBm.
Device noise: -70 dBm dir.
GENERAL SPECIFICATIONS
Power Supply: 220 V AC, 12 V DC.
Power consuption: 100mA on 12 V DC
Dimensions : 48x24x12 cm
19" Alumunium Eloxsal Case
- (Universal KM6-II SUBRACK type)
Total Weight: 3150 gr
Working Temperature: -20 ; + 50 C
Storage Temperature: - 30 ; + 85 C
Working relative humidity: %80.
TSEK Quality Certification.
Türk Telekom certification.
TSE Product Quality Certification.
(TSE: Turkish Standardize Institute.)